Filter
Top Products
10
You can also use six rechargeable nickel-cadmium batter-
ies (such as Cat. No. 23-125) to power the scanner. To
charge or recharge nickel-cadmium batteries, however,
you must remove them from the scanner and use an ex-
ternal charger (such as Cat. No. 23-134).
Note: If you are using a rechargeable scanner battery
pack, you must charge it before you can use your scanner
(see “Charging a Rechargeable Battery Pack” on
Page 14).
Caution: Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or re-
chargeable batteries of different capacities.
Follow these steps to install batteries or a battery pack.
1. Press down on the battery compartment cover on the
bottom of the scanner and slide the cover in the
direction of the arrow to remove it.
2. Slide the battery holder out of the battery compart-
ment.
20-566.fm Page 10 Thursday, August 5, 1999 8:04 AM