Filter
Top Products
KX II Quick Setup Guide 2
QSG-DKX2-v2.1.10-0F-E y 255-62-4022-00
b. Click the Effects tab.
Deselect the "Use the following transition effect for
menus and tooltips" option.
Click OK and close the Control Panel.
Windows® XP and 2003 Settings
To configure KVM target servers running Microsoft
Windows XP/2003:
1. Configure the mouse settings:
a. Choose Start > Control Panel > Mouse.
b. Click the Pointer Options tab.
c. In the Motion group:
Set the mouse motion speed setting to exactly the
middle speed.
Disable the "Enhanced pointer precision" option.
Disable the Snap To option.
Click OK.
2. Disable transition effects:
a. Select the Display option from the Control Panel.
b. Click the Appearance tab.
Click the Effects button.
Deselect the "Use the following transition effect for
menus and tooltips" option.
Click OK and close the Control Panel.
Windows® Vista Settings
To configure KVM target servers running Microsoft
Windows Vista:
1. Configure the mouse settings:
a. Choose Start > Settings > Control Panel > Mouse.
b. Click the Pointer Options tab.
c. In the Motion group:
Set the mouse motion speed setting to exactly the
middle speed.
Disable the "Enhanced pointer precision" option.
Click OK.
2. Disable animation and fade effects:
a. Select the System option from the Control Panel.
b. Select Performance Information then Tools >
Advanced Tools > Adjust to adjust the appearance and
performance of Windows.
c. Click the Advanced tab.
d. Click the Settings button in the Performance group to
open the Performance Options dialog.
e. Under Custom options, deselect the following
checkboxes:
Animation options:
Animate controls and elements inside windows
Animate windows when minimizing and maximizing
Fade options:
Fade or slide menus into view
Fade or slide ToolTips into view
Fade out menu items after clicking
3. Click OK and Close the Control Panel.
Linux® Settings
• (Standard Mouse Mode only) Set the mouse acceleration
to exactly 1 and set the threshold to exactly 1. Enter the
following command: xset mouse 1 1. This should be set
for execution upon login.
Sun Solaris™ Settings
1. Set the mouse acceleration value to exactly 1 and the
threshold to exactly 1.
2. Ensure that your video card is set to a supported
resolution and that its output is VGA, not composite sync.
Apple® Macintosh Settings
For KVM target servers running an Apple Macintosh operating
system, the preferred method is to use the D2CIM-VUSB and
Absolute Mouse Synchronization.
Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must
be select from the USB Profile menu or the Port Configuration
page.
IBM® AIX Settings
• Go to the Style Manager, click on Mouse Settings and set
Mouse Acceleration to 1.0 and Threshold to 3.0.
QS Rule
Step 2: Configure Network Firewall Settings
To enable remote access to the KX II, your network and
firewall must allow communication on TCP Port 5000. You can
also configure the KX II to use a different TCP port, then allow
communication on that port.
To access the KX II via a web browser, your firewall must also
allow access to TCP Port 443 (Standard HTTPS). Access to
TCP Port 80 (Standard HTTP) enables automatic redirection
of HTTP requests to HTTPS.
QS Rule
Step 3: Connect the Equipment