Raritan Computer MCC4 Switch User Manual


 
32 MASTERCONSOLE II USER MANUAL
TERM DEFINITION
Remote Console Keyboard, monitor, and mouse plugged into the Remote access kit.
Cat5 Remote KVM Module: Optional Remote Unit that connects to the
MasterConsole II to provide additional access to connected computers up to
650' away using Cat5 UTP Cable.
Cat5 Remote KVM Port: The Keyboard, Monitor, and Mouse ports on the
back of the Cat5 Remote KVM Module unit.
Satellite Unit Second-tier MasterConsole II located more than 30 feet from the base unit
and connected through its Remote Access Kit.
Scan Front panel button and On-Screen User Interface function used to activate
AutoScan.
Scan Rate The duration (in seconds) a channel’s computer is to remain displayed on the
monitor when AutoScan is activated.
Global Scan Rate: Scan rate is the same for all computers, if the Mode field
in the Configuration Menu is set to Global.
Channel-Specific (Individual) Scan Rate:: Scan rate specified for each
computer during the Scan cycle, if the Mode field in the Configuration Menu
is set to Individual. Channel-specific scan rates can be set in the Edit Names
and Scan Rate Menu.
Security When activated, and the system remains idle for a period of time, the next
user must enter an authorized User Password to establish access.
Selection Menu Used to select a computer.
Sorting Order of the channels listed in Selection Menu; either by Channel ID or by
Name.
Time Out the length of time that the system can remain idle (that is, since the last
keyboard/mouse or front panel operation) before the next user must enter an
authorized User Password to establish access.
User Password Enables access to the system after Time Out.