Filter
Top Products
16 PARAGON II USER MANUAL
c. The Channel Configuration menu will appear. Use the up- and down-arrow keys to move the
yellow highlight to the Name field for the channel port number where you installed the CPU and
press the [Enter] key. The highlight should turn light blue.
Figure 22 Channel Configuration Menu of a P2-UMT832M
d. Edit the name (it should turn green when you start typing). Press the [Enter] key when you finish,
and then press [S] to save the new name.
e. Press the [Enter] key to return to the Selection Menu. Verify that the new name appears in the
Selection Menu in green.
7. Repeat steps 5 and 6 for each P2CIM-PS2 and CPU you want to connect to the Base Unit’s channel
ports.