Filter
Top Products
CHAPTER 2: INSTALLATION 7
Initial Administrative Testing
To verify that an attached server can be viewed and controlled through the Paragon system:
1. When you first power ON the Paragon Base Unit, an attached User Station, and the User Station’s
attached monitor; a Login Menu will be displayed on the monitor. Type admin (all lowercase) in the
User Name field and press the [Enter] key. Type raritan (all lowercase) in the Password field and
press the [Enter] key.
Note: The factory-default user names are user01 through up to user16 (depending on the model of the Base
Unit) for regular users and admin for the admin user. User names are not case-sensitive. By default, a
password is required only for the admin user, and that password is raritan. Passwords are case-sensitive.
Figure 4 Login Menu
2. The monitor will display an On-Screen User Interface (OSUI) Selection Menu with the port of the
connected CPU displayed in green. (It will have no default name – the Name field will be blank.)
Figure 5 Selection Menu
3. Use the up- and down-arrow keys on the user station’s keyboard to move the highlight to the green
server port and press the [Enter] key.
4. Normal server access and operation indicates a successful connection.