Filter
Top Products
69
7. Linux
Linux
--disc5=off : disable Disconnect only with SCSI-ID 5
--sync_all=<20 | 10 | 5 | async>
To set Transfer rate for all SCSI ID
(for example)
--sync_all=10 : 10MB/sec for all SCSI-ID
--sync_all=async : Async. transfer for all SCSI-ID
--sync<n>=<20 | 10 | 5 | async>
To set Transfer rate for spesific SCSI ID
(for example)
--sync3=10 : 10MB/sec only for SCSI-ID 3
--sync5=async : Async.transfer only for SCSI-ID 5
[format]
# ascconf -v
PCI30HX, CB31 scsi configuration utility ....
AdvanSys ASC3050/ASC3350 found. I/O Base = 0800
View EEPROM Setting : ID-0 ID-1 ID-2 ID-3 ID-4 ID-5 ID-6 ID-7
Enable Disconnect : on off off on on on on on
Synchronous transfer: 10MB 5MB 20MB 20MB 20MB Async 20MB 20MB
# ascconf --disc_all=on --sync3=10
PCI30HX, CB31 scsi configuration utility ....
AdvanSys ASC3050/ASC3350 found. I/O Base = 0800
View EEPROM Setting : ID-0 ID-1 ID-2 ID-3 ID-4 ID-5 ID-6 ID-7
Enable Disconnect : on on on on on on on on
Synchronous transfer: 10MB 5MB 20MB 10MB 20MB Async 20MB 20MB