Filter
Top Products
25
2-5.1394 Storage Installation
This section describes how to connect a 1394 storage and install the driver. 1394 storage means Hard
Disk Drives(HDDs), Magneto Optical Disks(MOs), etc. Only Windows 98 SE, Windows 2000 or
Windows Me support such 1394 storage. The cable powered HDD, MO doesn’t work without a
power source. You can use our AC power adapter(sold separately) if you use the cable powered
HDD, MO.
Follow the steps to connect a 1394 Hard Disk Drive(HDD).
1.Connect the optional AC adapter(sold separately) to the CBFW3.
2.Connect a 1394 HDD to the CBFW3 with an IEEE1394 6pin-6pin cable.
3.You can connect the 1394 HDD without turning off the PC or 1394 HDD.
When your Windows version is Windows 98 SE(Second Edition), go to the Chapter 2-5-1.
When your Windows version is Windows 2000, go to the Chapter 2-5-2.
When your Windows version is Windows Me(Millennium Edition), go to the Chapter 2-5-1.
NOTE
1.The 6 pin to 6 pin cable is not included in the CBFW3 package. You can order this cable.
Refer to the Chapter 10.
2.The cable powered HDD, MO doesn’t work without a power source, typically DC +12V,
1.2A. You can use our optional AC power adapter, DC +12V, 1.2A. You can order this AC
power adapter. Refer to the Chapter 10.
AC Adapter
(Not include)
6pin-6pin cable
(Not include)