Filter
Top Products
Using Your Projector 33
6
Page up
Press to move to the previous page.
NOTE: The Mini USB cable must be connected
if you want to use the Page Up feature.
7
Mute
Press to mute or un-mute the projector speaker.
8
Page down
Press to move to the next page.
NOTE: The Mini USB cable must be connected
if you want to use the Page Down feature.
9 Video mode The projector has preset configurations that are
optimized for displaying data (presentation slides)
or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show the
current display mode. Pressing the Video Mode
button again will switch between modes.
10 Blank screen Press to hide/unhide the image.
11
Up
Press to navigate through the On-Screen Display
(OSD) Menu items.
12
Left
Press to navigate through the On-Screen Display
(OSD) Menu items.
13
Menu
Press to activate the OSD.
14
Volume up
Press to increase the volume.
15 Laser Point the remote control at the screen, press and
hold the laser button to activate the laser light.
WARNING: Do not look at the laser point when
it is active. Avoid directing the laser light on
your eyes.
16
Volume down
Press to decrease the volume.
17
Keystone adjustment
Press to adjust image distortion caused by tilting the
projector (+/-30 degrees).
18 Source Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-Video
source.