Filter
Top Products
39
E-DOC-CTC-20051017-0148 v1.0
Chapter 4
Voice over IP
Enable the telephony
service
Proceed as follows to enable the telephony service:
1 Go to the SpeedTouch™ Web pages.
2 In the menu, select Toolbox > Telephony.
3 In the upper right corner, click Configure.
4 Select Service Enabled.
5 Click Apply.
Assign phone numbers Proceed as follows to configure your Internet SIP telephone numbers:
1 Go to the SpeedTouch™ Web pages.
2 In the menu, select Toolbox > Telephony.
3 In the upper right corner, click Configure.
4 Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you
want to use the same number for both ports, select Port ‘all’.
5 Click Apply.
Configure the telephony
service
Proceed as follows to configure the SIP telephony service:
1 Go to the SpeedTouch™ Web pages.
2 In the menu, select Toolbox > Telephony.
3 In the upper right corner, click Expert configure.
4 Enter the IP address and the port number of the registrar and the proxy, as
For more information, see “1.2.1 Access via the Web Interface” on
page 7.
The phone numbers are provided by your provider.