Filter
Top Products
4
Unpacking
Carefully remove units from packaging. If there is any visible
damage, DO NOT attempt to operate the equipment. Notify your
dealer or shipping carrier immediately. Keep this guide for future
use.
System Contents
• Base Unit
The base unit has two
modular telephone jacks on
the right side and a green
indicator light.
• Extension Unit
The extension unit has one
jack on the right side and a green indicator light. This is the
unit that can be moved from location to location to create a
modem jack in an electrical outlet.
• Telephone Cord (6’)
A 6 ft. telephone cord is provided to connect
the base unit to the existing wall phone jack.
Follow the steps below to install the Wireless Modem Jack System.
NOTE: To ensure proper performance, it is important to
install the Base Unit FIRST then install the Extension Unit.
Also ensure that both units are securely plugged into the wall
outlets.
Base Unit
1. Plug one end of the provided telephone cord into either jack on
the right side of the base unit, and the other end into any
existing wall phone jack.
Getting Started
Installation
RC930_IB.QXD 10/10/00 1:12 PM Page 4