Filter
Top Products
M306NKT-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006 Page 55 of 104
(2) MAP tab
Specifying the emulation memory allocation
Sets the memory area assigned to the emulation memory by 4KB. Up to
four areas can be set.
An area set to “INTERNAL” will be allocated to the emulation memory
by selecting the check box. An unchecked area or an unset area will be
allocated to external area. Not allocated area is regarded as external
area.
The setting is effective only in the CS3#, CS2#, CS1# and CS0#. The
maps of SFR, internal ROM and RAM are set automatically.
(3) Flash Clear tab
Setting to clear the MCU’s internal flash ROM
Specify whether or not you want the MCU’s internal flash ROM to be
cleared when downloading the user program or data. (When cleared, the
content of the flash ROM is initialized to FFh.) The MCU’s internal
flash ROM is listed in block units.
- Any block which has had its check box selected is not cleared when
downloading. The memory content of this block remains intact
unless overwritten by downloading.
- Any block which has had its check box deselected is cleared when
downloading.
- Click the Select All button, and all blocks will be selected (marked
by a check mark, so that none of the blocks is cleared when
downloading).
- Click the Clear All button, and all blocks will be deselected (check
marks removed, so that all of them are cleared when downloading).
The option you have specified here remains effective the next time you
start up.
When the tab settings of (1) to (3) have been finished, click “OK”.