Filter
Top Products
( 2 / 7 )
1. Outline
The M32182T2-PTC is a converter for featuring the debugging function such as real-time tracing
when using emulators M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E with the M32182F3xFP.
2. Package Components
(1) M32182T2-PTC converter
(2) YQPACK144SD (made by Tokyo Eletech Corporation)
(3) NQPACK144SD (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE x4 (made by Tokyo Eletech Corporation)
(5) Screwdriver (made by Tokyo Eletech Corporation)
(6) M32182T2-PTC Instruction Manual (This manual)
4. Usage
The M32182T2-PTC can be used for debugging and board mounted evaluation in common by
mounting the NQPACK144SD on the target board.
(1) For debugging
Mount the NQPACK144SD (included with the M32182T2-PTC) on the 144QFP foot pattern of
the target board. Then connect the M32182T2-PTC via the YQPACK144SD. As the
M32180F8VWG is mounted on the M32182T2-PTC, all functions of the emulator such as real-
time tracing can be used.
Before using the M32182T2-PTC, be sure to read "8. Precautions" on page 7.
(2) For board-mounted evaluation
Mount the M32182F3xFP and the HQPACK144SD (separately available) in that order on the
NQPACK144SD on the target system.
Figure 1 Package components of the M32182T2-PTC
3. Specifications
Table 1 Specifications
M32182T2-PTC
YQ-GUIDE (x4)
Screwdriver
YQPACK144SD
NQPACK144SD
Applicable package
Supported MCU
Supported emulator
Mounted MCU
Clock
Power supply
144P6Q-A (144-pin 0.5-mm-pitch QFP)
M32182F3xFP
M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E
With the M32170T-SDI or M32100T-SDI-E, separately available M3T-PTC-
CNV is required.
M32180F8VWG
10 MHz
Supplied from the target board