Filter
Top Products
1. Outline
The M38D59T-RLFS is an emulator MCU board for the 38D5
Group.
2. Package Components (See Figure 1)
(1) M38D59T-RLFS......................................................... 1 pc.
(2) M3T-F160-80LCC converter board (preinstalled) ...... 1 pc.
(3) M38D59T-RLFS User's Manual (This manual).......... 1 pc.
(4) M38D59T-RLFS User's Manual (Japanese)................ 1 pc.
3. Specifications
Table 1 Specifications
Emulator
M38000T2-CPE
PC4701 + M38000TL2-FPD
Operation mode Single-chip mode
Max. operating
frequency
Vcc = 4.5 to 5.5 V: 12.5 MHz (frequency/2 mode)
Vcc = 4.0 to 5.5 V: 8.0 MHz (frequency/2 mode)
Vcc = 2.5 to 5.5 V: 12.5 MHz (frequency/4 mode)
Vcc = 2.0 to 5.5 V: 8.0 MHz (frequency/4 mode)
Vcc = 1.8 to 5.5 V: 5.0 MHz (frequency/4 mode)
Vcc = 2.5 to 5.5 V: 12.5 MHz (frequency/8 mode)
Vcc = 2.0 to 5.5 V: 8.0 MHz (frequency/8 mode)
Vcc = 1.8 to 5.5 V: 5.0 MHz (frequency/8 mode)
Vcc = 1.8 to 5.5 V: Low-speed mode
Operating power
voltage
1.8 to 5.5 V
4. Connection Procedure (See Figure 2)
The procedure for connecting the M38D59T-RLFS is shown
below.
(1) Mount an LCC socket on the user system.
(2) Attach the M3T-F160-80LCC to the M38D59T-RLFS
(preinstalled).
(3) Attach the tip of the probe of the emulator to the
M38D59T-RLFS.
(4) Attach the M3T-F160-80LCC to the LCC socket.
Before using the M38D59T-RLFS, be sure to read "7.
Precautions" on page 4.
M3T-F160-80LCC
M38D59T-RLFS
Figure 1 Package components of the M38D59T-RLFS
(3)
(2)
LCC socket
(4)
M3T-F160- 80LCC
M38D59T-RLFS
Emulator
80-pin 0.8-mm-pitch
(80P6N-A) foot pattern
(1)
●: No. 1 pin
Be sure to adjust the positions of the No. 1 pin
of foot pattern and each part.
Figure 2 Connection procedure of the M38D59T-RLFS
(2/4)