Filter
Top Products
(2/4)
1. Outline
The M3T-DUMMY80 is an accessory tool product which
connects the emulator probe and target system. Its dimensions
are the same as those of an 80-pin 0.8-mm-pitch QFP (20 x 14
mm) IC package (80P6N-A).
2. Package Components (See Figure 1)
(1) M3T-DUMMY80 main unit x 1
(2) Socket main unit x 1
(3) Socket frame (for 80P6N-A) x 2
(4)
User’s manual (This manual)
x 1
(5)
User’s manual (Japanese)
x 1
3. Applicable Sockets
The M3T-DUMMY80 has been tested with the following IC
sockets made by Matsushita Electric Works, Ltd. Be sure to use
them.
Socket main unit + socket frame (1 set):
AXS4803M195C (for 80P6N-A)
Socket frame for repair (200 pieces):
AXS4802M1 (for 80P6N-A)
4. Specifications
Table 1 Specifications
Applicable package
80P6N-A, 80P6N-C
(80-pin 0.8-mm-pitch QFP)
Max. permissible current 200 mA at 5 V
Insertion/removal
iterations of connector
20 times guaranteed
Insulation resistance 100M Ω or more
5. Usage (See Figure 2)
The M3T-DUMMY80 can be used for debugging and onboard
evaluation in common by mounting the socket main unit on the
target board.
(1) For debugging
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-DUMMY80 and socket
frame on it. Then attach the connector of the emulator.
(2) For onboard evaluation
Mount the socket main unit on the foot pattern of the
target board. Mount an MCU with on-chip flash memory
or one-time PROM on it. Then attach the socket frame on
it.
Before using the M3T-DUMMY80, be sure to read “8.
Precautions” on page 4.
Figure 1 Package components
(3) Figure 2 Usage of the M3T-DUMMY80
(3) Socket frame
(1) M3T-DUMMY80 main unit
(2) Socket main unit
For 80P6N-A, 80P6N-C
(Color: white)
For 80P6N-A
(Color: blue)
Socket frame
M3T-DUMMY80 main unit
MCU (QFP)
Emulator
(1) Debugging
Socket main unit
Foot pattern
: No. 1 pin
Be sure to align the pins.
(2) Onboard evaluation