Filter
Top Products
(2/4)
1. Outline
The M3T-FLX-120NSE is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 120-pin
0.4-mm-pitch LQFP (120P6R-A).
2. Package Components (See Figure 1)
(1) M3T-FLX-120NSE converter board
(2) YQPACK120SE (made by Tokyo Eletech Corporation)
(3) NQPACK120SE (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE (4 pieces) (made by Tokyo Eletech
Corporation)
(5) M3T-FLX-120NSE User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
120P6R-A
(120-pin 0.4-mm-pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The M3T-FLX-120NSE can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK120SE on the target board.
(1) For debugging
Mount the NQPACK120SE and YQPACK120SE on the
foot pattern of the target board in that order. And connect
the probe of the emulation pod to the upper connector of
the M3T-FLX-120NSE. Then connect the
YQPACK120SE and the M3T-FLX-120NSE.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK120SE (separately available) in
that order on the NQPACK120SE on the target system.
Before using the M3T-FLX-120NSE, be sure to read "7.
Precautions" on page 4.
Figure 1 Package components of the M3T-FLX-120NSE
Figure 2 Usage of the M3T-FLX-120NSE
Probe of emulation pod
(1) Debugging
M3T-FLX-120NSE
YQ-GUIDE (x4)
YQPACK120SE
NQPACK120SE
120-pin 0.4-mm-pitch
(120P6R-A) foot pattern
(2) Onboard evaluation
HQPACK120SE
(separately available)
MCU with on-chip flash
memory or one-time PROM
: No. 1 pin
Be sure to align the pins.
YQ-GUIDE (x4)
M3T-FLX-120NSE YQPACK120SE
NQPACK120SE