Filter
Top Products
SD-PEX20139 3
Package Contents
- 1 x USB 3.0 PCI Express Controller Card
- 1 x User Manual
- 1 x Driver CD
System Requirements
- Supports Windows® XP/Vista/7/8/ Server 2008/, Linux kernel 2.6
- 4-pin male Molex connector
Hardware Installation
1. Turn off the power to your computer
2. Unplug the power cord and remove your computers cover
3. Locate an empty PCIe slot on the motherboard and remove the slot bracket.
Save the bracket and screw for later.
4. To install, carefully align the cards bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
5. Fasten the card to the computer case with the bracket screw you previously
removed.
6. Connect the card to the Power Supply Unit via Molex connector.
7. Replace the computer cover and reconnect the power cord