Filter
Top Products
Fasten the user system interface cable head to the IC socket for an FP-144 package on the user
system with the four screws (M2
x 10 mm) provided. Each screw should be tightened a little at a
time, alternating between screws on opposing corners. Take special care, such as manually securing
the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
Pin 1
Cable head
IC socket
(NQPACK144SD
manufactured by
Tokyo Eletech Coporation)
Screws (M2 x 10 mm)
User system
Figure 4 Connecting User System Interface Cable to User System
8