Filter
Top Products
1. Outline
The R0E330850MSRC0 is an emulation memory board for the M32C/80 Series compact emulator. The memory space can be
allocated to the emulation memory by using with the M32C/80 Series compact emulator M30850T3-CPE.
2. Package Components
Table 1 Package Components
Item Quantity
R0E330850MSRC0 emulation memory board 1
Spacers for fixing the emulation memory board 4
R0E330850MSRC0 User’s Manual (this document)
1
R0E330850MSRC0 User’s Manual (Japanese)
1
3. Connection Procedure
The procedure for connecting the R0E330850MSRC0 is shown in Figure 1.
(1) Unscrew the four screws securing the compact emulator.
(2) Pull out the M30850T2-EPBM from the compact emulator control
board (hereafter, upper board) vertically, otherwise the connectors
may be damaged.
(3) Attach connector J1 of the R0E330850MSRC0 to connector J3 of
the upper board, and J2 of the R0E330850MSRC0 to connector J4
of the upper board.
(4) Tighten the spacers (included) in an even, crisscross pattern to
secure the R0E330850MSRC0 with such as box wrench.
(5) Attach connector J1 of the M30850T2-EPBM to connector J3 of the
R0E330850MSRC0, and J2 of the M30850T2-EPBM to connector
J4 of the R0E330850MSRC0.
(6) Tighten the four screws (which are unscrewed in the procedure 1) in
an even, crisscross pattern to secure the M30850T2-EPBM with a
screwdriver.
(7) After replacing the board, perform the self-check to make sure that
the R0E330850MSRC0 has been installed properly.
Screws
M30850T2-EPBM
R0E330850MSRC0
Spacers
M30850T2-EPBM
R0E330850MSRC0
Screws
Figure 1 Connecting procedure of the emulation memory board
CAUTION
Cautions to Be Taken for This Product:
z Before you replace the emulation memory board, shut off the power, otherwise internal circuits may be damaged.
z Insert or pull out the connectors vertically, otherwise the connectors may be damaged.
(2/4)