Filter
Top Products
(2/4)
1. Outline
The R0E53035ACFJ50 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 52-pin 0.65mm pitch LQFP of
R8C/35A group.
2. Package Components (See Figure 1)
Check to see if the R0E53035ACFJ50 package has all the
following contents before using this product.
(1) R0E53035ACFJ50 converter board ............................ 1 pc.
(2) YQPACK052SB
(made by Tokyo Eletech Corporation).......... 1 pc.
(3) NQPACK052SB
(made by Tokyo Eletech Corporation) ........ 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53035ACFJ50 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0052JA-A:
formerly 52P6A-A
(52-pin 0.65mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53035ACFJ50 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK052SB on the user system.
(1) For debugging
Mount the NQPACK052SB on the foot pattern of the user
system and attach the YQPACK052SB on it. In addition,
connect the R0E53035ACFJ50 to the YQPACK052SB,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53035ACFJ50.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK052SB (not included) in order
on the NQPACK052SB on the user system.
Before using the R0E53035ACFJ50, be sure to read "7.
Precautions" on page 4.
R0E53035ACFJ50
YQ-GUIDE (×4)
YQPACK052SB
NQPACK052SB
Figure 1 Package components of the R0E53035ACFJ50
●: No.1 pin
Be sure to align the pins.
FLASH MCU, etc.
HQPACK052SB
(not included)
(2) For on-board
evaluation
(1) For debugging
YQPACK052SB
YQ-GUIDE (×4)
NQPACK052SB
52-pin 0.65mm pitch
foot pattern
R0E53035ACFJ50
Flexible cable
R0E001000FLX10
Figure 2 Usage of the R0E53035ACFJ50