Ricoh 180 Copier User Manual


 
Basic Functions
31
2
Basic Functions
The following basic functions are ex-
plained in this section.
Adjusting Copy Image Density
Auto and Manual Image Density
Selecting Original Type Setting
Text, Text·Photo, Photo
Selecting Copy Paper
Auto Paper Select and Manual Pa-
per Select
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
You can select functions to be acti-
vated when Auto Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See P.78 “1. General Fea-
tures
1
/
4
.
You can change default settings for
basic functions. See P.78 “Set-
tings You Can Change with the User
Tools”.
You can have the settings stored in
program 10 used as the initial set-
tings (when the initial display is
shown). See P.47 “Program—
Storing Your Copy Settings in Mem-
ory”, P.80 “10.Initial Mode set”
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three types in this function:
Auto Image Density
The machine automatically adjusts
the image density.
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
A Select one of Image Density
modes.
Auto image density
A Make sure that the Auto Image
Density indicator is lit.
Note
If not, press the {
Auto Image
Density
} key.