Filter
Top Products
Copying from the Bypass Tray
43
2
E Press the [
Exit
] key.
Reference
To go on to specify a paper
size, press the [
Pap. Size]
] key.
See ⇒ P.40 “When copying
onto custom size copy paper”.
See ⇒ P.41 “When copying
onto standard size copy paper”.
E Set your originals, then press the
{
{{
{
Start
}
}}
} key.
Important
❒
When copying onto OHP trans-
parencies, remove copied sheets
one by one.
Note
❒
Push on the engraved center
point of the bypass tray to close it.
When Copying onto
Envelopes
Important
❒
If you select Thick Paper as the Pa-
per Type setting and select Stand-
ard or Custom as the Paper Size
setting, these functions will remain
in effect even after Auto Clear or
pressing the {
Clear Modes
} key.
You can alter this behavior by
changing “12. Reset Bypass Set”.
See ⇒ P.80 “1. General Features
3
/
4
”
Reference
For detail about the recommended
envelopes, see ⇒ P.17 “Copy Pa-
per”
A Open the bypass tray.