Filter
Top Products
PostScript Languange Printer Commands 1-15
Device Parameters of Type /FileSystem
File system access from PostScript programs is described in Sections 3.8.2 and 3.8.3 of
the Reference Manual and Section 3.3 of the Supplement.
Parameters for Disk
The factory default values for the %disk% device parameters are shown below.
%disk% Device Parameters
Key Type Default For More Information
BlockSize *
integer 1024 See Section 3.3 of the Supplement.
Bus*
name %scsi% See Section 3.3 of the Supplement.
Free** §
integer disk-dependent See Section 3.3 of the Supplement.
HasNames*
boolean true See Section 3.3 of the Supplement.
InitializeAction
integer 0 See Section 3.3 of the Supplement.
Interleave*
integer 5 See Section 3.3 of the Supplement.
LogicalSize§ **
integer disk-dependent See Section 3.3 of the Supplement.
Mounted
boolean true See Section 3.3 of the Supplement.
PhysicalSize** §
integer disk-dependent See Section 3.3 of the Supplement.
PrepareAction
integer 0 See Section 3.3 of the Supplement.
Removable*
boolean false See Section 3.3 of the Supplement.
Searchable
boolean true See Section 3.3 of the Supplement.
SearchOrder
integer 0 See Section 3.3 of the Supplement.
Type*
name /FileSystem See Section 3.3 of the Supplement.
Writable
boolean true See Section 3.3 of the Supplement.
§ Value is derived from the disk media.
* Value is a read-only constant.
** Value is read-only but changes.
Device %disk0% is on the %scsi% bus.