Filter
Top Products
If Your Machine Does Not Operate as You Want
255
5
If You Cannot Exit Connect Copy
Machine Status Problem/Cause Action
Nothing happens when
you press the [
Connect
] key.
Originals are being
scanned or copied.
Press the master unit
{
Clear/Stop
}
key and then
press the [
Cancel
] key to
cancel scanning or copy-
ing.
There is a paper misfeed in
either the master unit or
sub-unit.
Clear the paper misfeed in
the master unit or sub-unit.
Reference
⇒
P.270
“
x
Clearing
Misfeeds”
⇒
P.293
“
e
Removing
Jammed Staples”
If the display shows that a
cover is open, follow the in-
structions given. For all
other situations, follow the
instructions on the display.
To exit Connect Copy
mode, press the master
unit
{
Clear/Stop
}
key, then
press the [
Connect
] key.
The master unit
{
Clear/
Stop
}
key was pressed and
scanning of the original has
been interrupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [
Cancel
] key.
The
{
Clear/Stop
}
key was
pressed on either the mas-
ter unit or sub-unit and
copying has been inter-
rupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [
Cancel
] key.