Filter
Top Products
Supplementary Specifications
135
6
• If the number of originals placed is less than the number specified for com-
bining, the last page segment will be left blank as shown.
❖
❖❖
❖ Series Copies
• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within acceptable range. However, with some ratios, parts of the
image might not be copied.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• You cannot copy with originals different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• In Magazine or Booklet mode, the copying may take some time after scan-
ning originals.
• When the booklet finisher is installed, if you select Saddle Stitch function
in Magazine or Booklet mode, the machine staples and folds the paper in
the centre, then delivers the paper folded.
❖
❖❖
❖ Image Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
❖
❖❖
❖ Centring
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
JupiterC2_GB_Copy_F_FM.book Page 135 Friday, January 20, 2006 7:37 PM