Filter
Top Products
System Settings
56
2
File Transfer
This section describes the user tools in the File Transfer menu under System Set-
tings.
Default settings are shown in bold type.
❖ Delivery Option
Enables or disables sending stored or scanned documents to the ScanRouter
delivery server.
The default setting is Off.
Set this option when specifying whether or not to use the ScanRouter delivery
server. If you do, you will have to re-register I/O devices in the ScanRouter
delivery server.
❖ Capture Server IPv4 Address
Specify the capture server IPv4 address.
This setting appears when the media link board is installed, and that the cap-
ture function is being used by the ScanRouter delivery server.
❖ Fax RX File Transmission
Specify how to deliver fax files received via the different lines.
• Setting per Line
•Line 1
•Line 2
•Line 3
•E-mail
• IP-Fax
The lines appear according to the operating environment.
• RX File Delivery
Specifies whether or not received fax documents are sent to the ScanRouter
delivery software for each fax line.
The default setting is Do not Deliver.
•Print at Delivery
Specify whether or not received fax documents sent to the ScanRouter de-
livery software should also be printed at the same time.
The default setting is Do not Print.
• File to Deliver
Specify whether all received fax documents or only received fax docu-
ments that include delivery codes (ID or SUB/SEP codes) are sent to the
ScanRouter delivery software.
The default setting is Print File.