Filter
Top Products
18
English
Introduction
7 ECO Dim the projector lamp which will
lower power consumption and extend
the lamp life.
8 Volume +/- Increase/decrease speaker volume.
9 Video Press “Video” to choose Video in
terminal.
10 HDMI Press “HDMI” to choose HDMI in
terminal.
11 Magnify Zoom in the projector display.
12 S-Video Press “S-Video” to choose S-Video in
terminal.
13 Power Refer to the “Power On/Off the Pro-
jector” section. (See pages 22~23)
14 Menu Press “Menu” to launch the On Screen
Display (OSD), back to the top level of
OSD for the OSD main menu opera-
tion. (See page 28)
15 Input Press “Input” to choose RGB, Compo-
nent, S-Video, HDMI and Composite
sources.
16 Auto Set Automatically synchronize the projec-
tor to the input source.
17 Picture Select the Image mode from Bright,
Standard and Natural.
18 Keystone +/- Adjust the image to compensate for
distortion caused by tilting the projec-
tor.
19 Computer1 Press “Computer1” to choose Com-
puter in/Component in terminal.
20 Computer2 This key works same as “Computer
1” with this projector.
21 Aspect Use this function to choose your de-
sired aspect ratio.
22 Status Shows the Status display menu.
(See page 39)
The “Magnify”
function could not be
operated, when “As-
pect” is set to “Native”.
N
o
t
e