Filter
Top Products
Combine—Combining 2 Originals onto One Print
35
1
To Choose a Custom
Reproduction Ratio
A Press the {
{{
{
Center/Edge Erase
}
}}
}
key twice.
B Press the {
{{
{}
}}
} and {
{{
{}
}}
} key to
select the original size and di-
rection.
C When you reach the desired
size and direction, press the
{
{{
{q
qq
q}
}}
} key.
C
Press the {
{{
{
Start
}
}}
} key.
D
The beeper sounds after the first
original is on the master. Set the
second original face down.
E
Press the {
{{
{
Start
}
}}
} key.
F
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see ⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
TSLS01DE
TSLS01JE
TSLS012E
TSLS012E
SilverV-gb.book Page 35 Monday, May 15, 2000 3:32 PM