Filter
Top Products
Problem Causes Solutions
An error message remains,
even if misfed paper is
removed.
• When a misfeed
message appears, it
remains until you open
and close the cover as
required.
• Paper is still jammed in
the tray.
Remove misfed paper, and then open
and close the cover. For details about
removing jammed paper, see p.112
"Removing Jammed Paper".
Print images are printed on
the reverse side of the
paper.
You may have loaded the
paper incorrectly.
• Load paper into the paper tray or
tray 3 (LCT) with the print side up.
• Load paper into the Large
capacity tray (LCT), or bypass
tray with the print side down.
Misfeeds occur frequently. The tray's side or end fences
may not be set properly.
• Remove misfed paper. For details
about removing jammed paper,
see p.112 "Removing Jammed
Paper".
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see p.46 "Loading
Paper".
Misfeeds occur frequently. Paper size setting is not
correct.
• Remove misfed paper. For details
about removing jammed paper,
see p.112 "Removing Jammed
Paper".
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size with the
control panel, see "Changing to a
Size That Is Not Automatically
Detected", Operating Instructions.
When You Have Problems Operating the Printer
77