RocketFish RF-GUV1124 Network Card User Manual


 
2
Rocketfish RF-GUV1124
Powerline Networking Kit
Safety information
Take the following precautions when using this product:
Read all instructions before installing and operating.
Keep all instructions for later reference.
Follow all warnings and instructions.
This product should not be installed in any electrical socket so that
the product’s venting holes are pointing downward.
Use a dry cloth for cleaning. Unplug the device from the power
outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
Do not operate this product near water.
Do not place this product near or over a radiator or heat register.
This product relies on the building’s electrical installation for
short-circuit (over-current) protection.
Do not allow anything to rest on the product’s power plug. Do not
locate this product where the cords may be stepped on.
Because this product sends data over power lines, we recommend
that you plug it directly into a power outlet. Do not plug the device
into a UPS (uninterruptible power supply) or power strip with surge
protection. The product has its own power filter for protection
against surges.
Only a qualified technician should service this product. Opening or
removing covers may result in exposure to dangerous voltage
points or other risks.
Unplug the product from the power outlet and refer the product to
qualified service personnel for the following conditions:
When the power cords are damaged or frayed.
When liquid has been spilled into the product.
When the product has been exposed to rain or water.
When the product does not operate normally when the
operating instructions are followed.
When the product exhibits a distinct change in performance.
10-0764 GUV1124-EN.fm Page 2 Wednesday, November 3, 2010 10:21 AM