Filter
Top Products
7
RF-WTRMS
2 Press and release the link button on the bottom of the
mouse. The two devices establish their communication
link. The receiver’s status light first blinks green, then
turns red when the connection is made.
The mouse is now ready to use.
Operating tips
For best performance and RF reception:
• Place the receiver at least 8 inches (20 cm) away from all
electrical devices, such as your monitor, speakers, or
external drives. If necessary, use the extension cable to
move the receiver away from the computer (if your
computer is too close to other electrical devices). Plug
the receiver into an extension cable (USB A male to
USB A female, not included), and plug the extension
cable into the computer.
• Avoid using the mouse on a metal surface. Metals such
as iron, aluminum, or copper shield the radio frequency
transmission and may slow down the mouse’s response
time or cause the mouse to fail temporarily.
• The mouse enters a Sleep mode whenever your
computer does. To activate the mouse, just move or click
the mouse.
Receiver link button
RF-WTRMS.fm Page 7 Wednesday, July 26, 2006 6:09 PM