Filter
Top Products
26
Chapter 1: Getting Started
1-3 Assembling and Installing
Step 4: Remove the Protective Media
The protective media shown below is attached to this machine when it is shipped from the factory. When you have
finished installing the machine, remove all protective media.
Front
2) Peel off the tape.
7) Remove the retainer (2).6) Remove the retainer (1).
8) Attach the retainers you re-
moved in step 6) and 7).
Rear
Retainer (2)
Retainer (1)
1) Remove these packings.
Packing Packing
5) Peel off the tape.
If the screw for the retainer is difficult to loosen, use a screw-
driver to remove it.
4) Peel off the tape, and
remove the packing.
(Pull straight back to-
ward you to extract.)
3) Peel off the tapes,
and remove the
packings.