Filter
Top Products
UltraMatrix Single unit Installation
The following installation procedure features the 4XE model. Installation for
other models (2, 4, or 8 computers) follow the same basic procedure.
It is recommended that power to all monitors, computers, and UltraMatrix be off
until all connections have been made.
The below illustration shows the basic cable connections for UltraMatrix and the
installation steps to properly connect the cables, computers, and KVM stations
to UltraMatrix.
1. Connect a KVM station to the KVM 1 DB25F connector using the
appropriate KVM adapter cable. Depending on the model, connect other
KVM stations to the KVM x DB25F connector.
2. Connect the computers to UltraMatrix using the appropriate CPU adapter
cable. Connect the keyboard, monitor, and mouse computer ports to the
corresponding connectors on the CPU adapter cable. Connect the DB25M
connector to the CPU DB25F connector on UltraMatrix.
3. Connect other computers (4, 8, 12, or 16 depending on model)
4. With all cabling in place, power on all monitors, the UltraMatrix switch, and
boot the computers last.
Please refer to the Installation and Operations manual for the installation
procedure for an expanded system.
KVM Station
KVM adapter
cable
CPU adapter
cable