Filter
Top Products
INTRODUCTION
CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither does
the manufacturer assume any liability for damages resulting from the use of
the information contained herein. The manufacturer reserves the right to
change the specifications, functions, or circuitry of the product without notice.
The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.
System introduction
Thank you for choosing the Rose Electronics
CrystalView DVI CATx KVM
station extender. The CrystalView DVI CATx is a very versatile CATx KVM
extender. It supports the latest digital DVI video. All combinations of DVI
monitors and video cards are supported.
The system consists of two Units, a transmitter and a receiver. The
transmitter connects to your CPUs keyboard, DVI monitor, and mouse
connectors, or to a Rose KVM switch. The receiver connects to a keyboard,
DVI video monitor and mouse or KVM station. The transmitter and receiver
are connected together with CATx industry standard cable. The receiver can
be up to 450 feet from the transmitter using CAT5, 5e, 6, or 7 cables.
All models are available with transmitter and receiver KVM access. With
transmitter KVM access an additional KVM station to be connected to the
transmitter unit. Serial and full stereo audio support is optional on all models.
Using the CrystalView DVI CATx to remotely access your computer has
several advantages over conventional extenders. The CrystalView DVI CATx
transmits data digitally which provides a clear, sharp picture. Computers
used in hazardous industrial environments can be accessed remotely,
keeping the users safe and unexposed to any hazards.