Filter
Top Products
30
CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL
Appendix E. Rack mount instructions
CrystalView MINI model is not rack mountable.
The optional rack mount kit includes the following items:
n Two black anodized mounting brackets.
n Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your CrystalView, attach the two rack mounting
brackets to your Unit with the short flange against the Unit using the
four screws provided. Do not over tighten the screws used to mount
the Unit to the mounting brackets. Use only the hardware provided,
using hardware other than that provided could cause damage to the
electronics and/or result in loss of mounting integrity. Secure the
mounting brackets to the rack using the appropriate size bolts, nuts
and lock washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 0
ο
C to 45
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to
prevent instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain
relief for all cables.
e). Provide a grounded power source to all Units. Pay special
attention to overall branch circuit load ratings before
connecting equipment to this source. Overloaded circuits are
potential fire hazards and can cause equipment failures or
poor performance.
Appendix F. Rack mount illustration