Filter
Top Products
3
User Manual
SATA-150 1-Int/1-Ext Port PCI Adapter RC205
PCI Host Adapter for the operating systems:
New & Existing Windows 98/98 SE
New & Existing Windows ME
New & Existing Windows NT 4.0
New & Existing Windows 2000
New & Existing Windows XP
2.1. Windows 98/98SE Driver Installation
For New Windows 98/98 SE Systems
1. After the Serial ATA PCI Host Adapter and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
2. Once Windows has been installed, double click My Computer/Control Panel/System, then click
Device Manager.
3. Double click Other Devices then PCI RAID Controller.
4. Click Driver tab, then Update Driver.
5. Insert the Driver diskette and click Next.
6. Select Search for a better driver than the one ...option and click Next.
7. Check Specify a location, uncheck the other boxes, type in A:\ and click Next. Click Next and
then Finish.
8. Remove the Driver diskette and click Yes to restart Windows to complete driver installation.
For Existing Windows 98/98 SE Systems
1. After the Serial ATA PCI Host Adapter and attached drives are configured, boot up Windows.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device option and then click Next.
4. Insert the Driver diskette, check Specify a location, uncheck the other boxes, type in A:\, and
click Next.
5. Click Next and then Finish respectively.
6. Remove the Driver diskette and restart Windows to complete driver installation.
2.2. Windows ME Driver Installation
For New Windows ME Systems
1. After the Serial ATA PCI Host Adapter and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
2. Once Windows has been installed, click My Computer, then click Properties. Click Device