Filter
Top Products
11
2008 RuggedCom Inc. All rights reserved Rev104
4.1.1 Rack Mounting
The RS416 can be rack mounted using the included rack mount adapter assemblies shown in
Figure 3. Secure the one rack mount adapter to the front of each side of the chassis using the
included black PAN head Philips screws in the positions shown in Figure 4. The entire chassis can
then be mounted to a standard 19” rack. An additional two rack mount adapters are included to
optionally secure the rear of the chassis in high-vibration, or seismically active locations.
Figure 3: 19” Rack Mount Adapters
Figure 4: Rack mount adapter mounting location
NOTE: Since heat within the RS416 is channeled to the enclosure, it is recommended that 1 rack
unit of space (1.75”) be kept unpopulated and free of equipment above each RS416 product to
allow for a small amount of convectional airflow. Although forced airflow is not necessary, any
increase in airflow will result in a reduction of ambient temperature that will improve long-term
reliability of all equipment mounted within the rack space.