Filter
Top Products
31
2008 RuggedCom Inc. All rights reserved Rev104
5.3.2 Ethernet Ports
5.3.2.1 Copper Ports
Parameter Specification Notes
Speed 10/100 Mbps Auto-negotiating
Duplex FDX / HDX Auto-negotiating
Cable-Type > Category 5 Shielded/Unshielded
Wiring Standard TIA/EIA T568A/B Auto-Crossover, Auto-polarity
Max Distance 100 m
Connector RJ45
Isolation 1.5 kV RMS 1-minute
Table 11: Ethernet Ports - Copper Specifications
5.3.2.2 Fiber Optic Ports
The following sections detail fiber optic specifications on ports that can be ordered with the RS416.
The user determines the type of optics at time of ordering and can determine the modules installed
on a particular unit by reading the factory data file via the ROS
TM
user interface. The following
section provides detailed specifications of fiber optic modules.
The dual-port fast Ethernet optical specifications for slots 5 and 6 are shown in Table 12 organized
by module order code. Module order codes are contained within each product’s factory data when
assembled and configured at the factory. Consult ROS
TM
to determine the optical assemblies
installed in a particular product.
Optics
Order Code
Mode /
Connector
Tx
λ
λλ
λ
(nm)
Cable
Type
2
(
µ
µµ
µm)
Tx Pwr
(dBm)
3
(Min/Max)
Rx
Sensitivity
(dBm)
3
Rx
Saturation
(dBm)
3
Typical
Distance
(km)
1
Power
Budget
(dB)
12-11-0011 MM / ST 850 50/125 -16.5/-10.6 -34 -11.2 2 21
12-11-0012 SM / ST 1310 9/125
-27 / -14
-35 -3 5 8
12-11-0007 MM / ST
12-11-0009 MM / SC
12-11-0008 MM / MTRJ
1310 50/125 -15.7 -33.5 -11 2 17
12-11-0046 MM / LC 1310 50/125 -19 / -14 -32 -14 2 15
12-11-0006 SM / ST
12-11-0005 SM / SC
12-11-0004 SM / LC
1310 9/125 -15/-8 -32 -7 20 16.5
12-11-0031 SM / SC
12-11-0032 SM / LC
1310 9/125 -5 / 0 -35 -3 50 32.5
12-11-0033 SM / SC
12-11-0034 SM / LC
1310 9/125 0 / 5 -37 0 90 39.5
Table 12: Ethernet Ports – Fiber Optic Specifications