Filter
Top Products
3. Installation Procedures
RuggedCom® RuggedMAX WiN7000 18 Installation Guide Rev1
3.4.2. Pole Mounting
Figure 3.2. WiN7000 Pole Mounting Diagram
Item Quantity Description
1 1 Mounting brackets
2 1 WiN7000 Base Station
3 2 Fastening brackets
4 4 Screw 5/16" hex cap × 6"
5 8 Nut NF 16 hex
6 10 Washer flat 5/16"
7 10 Washer spring 5/16"
8 4 Screw NC 1/4" × 1/2" hex
9 4 Washer flat NC 1/4"
10 4 Washer spring NC 1/4"
11 1 Pole
12 2 Bolt NC 1/4"
13 2 Screw NC 5/16" × 1/2"
14 1 Mounting Upper Bracket
Table 3.1. WiN7000 Pole Mount Parts List
Procedure 3.1. Installing the WiN7000 on a Pole
1. Select a mounting location on the pole.
2. Assemble the fastening brackets to the mounting bracket using the 5/16" × 6" hex cap screws
(Item 4), NF 16 hex nuts (Item 5), 5/16" flat washers (Item 6), and 5/16" spring washers (Item
7).