Filter
Top Products
5. Menu
User’s Manual
19
5. TINT: Adjust color tones (0 ~ 30). The higher the setting, the picture becomes greenish. The lower the setting, the
picture becomes purplish.
6. COLOR TEMP.: Adjust the color temperature.
■
0 : The default color temperature of lamp.
■
1 : Low color temperature (6500°K). Make the white color reddish.
■
2 : Middle color temperature (9000°K). Make the white color normal.
■
3 : High color temperature (11500°K). Make the white color bluish.
7. FILTERS: Turn on /off the video filters. This could reduce the noise in the picture to get sharper picture. There are
4 filters for video input (0 ~ 3) and 2 filters for graphic input (0 ~ 1). Higher the setting, the less the noise.
8. RED: Adjust red color independently (0 ~ 30). Higher the setting, the greater the red color intensity. And lower the
setting, lower the red color intensity.
9. GREEN: Adjust green color independently (0 ~ 30). Higher the setting, the greater the green color intensity. And
lower the setting, lower the green color intensity.
10. BLUE: Adjust blue color independently (0 ~ 30). Higher the setting, the greater the blue color intensity. And lower
the setting, lower the blue color intensity.
11. YELLOW: Adjust yellow color independently (0 ~ 30). Higher the setting, the greater the yellow color intensity.
And lower the setting, lower the yellow color intensity.
12. WHITE: Adjust the white color independently (0 ~ 10). Higher the setting, the greater the white color intensity.
And lower the setting, lower the white color intensity.
DISPLAY Setting Page
In this Menu Page, you could set the way how the projector display the picture.
There are 5 Menu Items in this page: SOURCE — ASPECT — PC&HDTV — SAVE — LOAD.
1. SOURCE: Select the input source.
■
VIDEO: Composite video signal input.
■
S-VIDEO: S-Video signal input
■
COMPONENT: Component Y/C
B
/C
R
input
■
COMPONENT HD: DTV Y/P
B
/P
R
input
■
RGB HD: DTV RGBHV signal input
■
PC: Computer signal input PC