Filter
Top Products
20 Runco CP-42HD/CP-52HD Owner’s Operating Manual
4. Operations
1. Turn on your source components.
2. Plug the female end of the supplied
power cord into the AC receptacle inside
the back input panel of the Climate
Series LCD (AC 100V ~ 240 V).
3. Connect the other end to your AC power
source.
4. Press the ON button ( ) on the
remote control to turn on the display (or
press the power button ( ) on the
side of the display).
5. After a brief warm-up period
(approximately 10 seconds), the Climate
Series LCD will display an image.
The Climate Series LCD OSD language
is initially set to English, but can also
display the menus in French or Spanish.
To change the OSD language:
1. Press MENU.
2. Select Setup from the Main Menu.
3. Select Menu Language from the Setup
Menu.
4. Press or to highlight the desired
language and press O.K. The change
takes effect immediately.
4.1
Turning on the Power
4.2
Changing the OSD
Language