Runco PL-61CX Computer Monitor User Manual


 
46
Option3 Settings Menu
Using the timer
This function sets the monitor to turn ON/OFF
automatically at a set time.
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION3, then press
the MENU/ENTER button.
The OPTION3 screen appears.
2. Use the and buttons to select TIMER, then press
the MENU/ENTER button.
The TIMER screen appears.
TIMER
EXIT
PRESENT TIME
PROGRAM : OFF
SEL.
RETURN
MENU/ENTER
OK
3. Set the TIMER using ▲▼
and
buttons.
See page 32 to set PRESENT TIME.
See page 33 to set PROGRAM.
Information
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
PRESENT TIME
This sets the day of the week and present time.
Example: Setting WEDNESDAY, 22:05
Perform Steps 1-2 of TIMER, then...
3. Use the and buttons to select PRESENT TIME,
then press the MENU/ENTER button.
The PRESENT TIME screen appears.
EXIT
SEL.
RETURN
PRESENT TIME
WEDNESDAY
13 : 00 : 00
RETURN
DAYLIGHT
SAVING TIME
: OFF
ADJ.
4. Use the and buttons to select the item, then adjust
using the
and
buttons.
EXIT
SEL.
RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00
RETURN
DAYLIGHT
SAVING TIME
: OFF
ADJ.
The mode switches as follows each time the
or
button is pressed:
DAYLIGHT SAVING TIME
ON OFF
Day
SUNDAY MONDAY ..... FRIDAY SATURDAY
Hour/Minutes
00:00 00:01 00:02 ..... 23:58 23:59
5. Once the setting is completed...
Use the and buttons to select SET, then press
the MENU/ENTER button.
The adjustments are stored and return to the TIMER
menu.
EXIT
SEL.
RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00
: OFF
MENU/ENTER
OK
RETURN
DAYLIGHT
SAVING TIME
SET
Information
PRESENT TIME settings
DAYLIGHT SAVING TIME
........................ Use to set DAYLIGHT SAVING
TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day ................Set the day of the week (e.g. Sunday).
Hour ..............Set the hour in the 24-hour format
(range 00 to 23).
Minutes ......... Set the minutes (range 00 to 59).
* If you press the EXIT button instead of the MENU/
ENTER button in step 5, the settings can not be mode.