Runco CL-700 Projector User Manual


 
5. Menu
20
Active Image Area
Active Image Area
16:9 Screens:
LETTERBOX: The image in the Letterbox mode will be stretched vertically,
and the top and bottom portion 'blanked off'. This ratio is best suited for
LaserDisc movies or non-anamorphic DVD's.
VIRTUAL WIDE: A 4:3 image is horizontally stretched non-linearly to allow a
4:3 image to completely fill a 16:9 screen without using any blanking.
Active Image Area
2. ASPECT: There are four aspect ratios available that can be selected for video signal inputs.
ANAMORPHIC: The image is compressed vertically, but anamorphic software
will appear properly proportioned. This is best suited for use with 16:9 DVD's.
4 x 3: The input signal will be scaled to fit in the center of the 16:9 screen.
3. PC & HDTV: The following settings are only available with a PC or DTV RGB signal:
* AUTO: Adjusts the phase, frequency and position signal.
* PHASE: Adjusts the phase of signal.
* FREQUENCY: Adjusts the frequency of signal.
* H. POS.: Adjusts the horizontal position of the image.
* V. POS.: Adjusts the vertical position of image.
4. SAVE: There are 3 video memories in which the user could save their settings,
including all menu items of the Picture Setting Menu.
5. LOAD: Loads the settings from one of three video memories.