Filter
Top Products
9
Projector Description
Input Panel
Top View
Exhaust Vents
Vertical Lens Shift
Zoom Tab
Focus Ring
Intake Vents
(Side)
Power
Lamp
Temp
Focus Ring: Turn this ring to focus the
image.
Zoom Tab: Turn this tab to make the image
larger or smaller.
V
ertical Lens Shift:
Using the provided
adjustment tool, turn this to move the lens
up and down.
Power:
Led is red when unit is in standby,
blue when it is in operation.
Lamp: When the lamp is on, this LED is
blue. When the lamp is off, this LED is off.
Temp: If the Projector has overheated and
shut down, this will light red.
Intake Vents: This is where cooler air
enters the Projector. Ensure that it is never
blocked or overheating will result.
Exhaust V
ents:
This is where hot air exits
the Projector. This air can be quite hot.
Ensure that there are no heat-sensitive
objects near it and that it is never blocked.
AC Power In
(100-240 VAC)
RGB Input
(from DHD Controller)
DVI-I IN
(from DHD
Controller)
ComLink
Connect the ComLink cable
from the DHD Controller here
Intake Vents
(Bottom)
Service Reset
To be used by Authorized
Runco Service Technicians