Filter
Top Products
INSTALLER GUIDE
UNO-S2 Keypad Diagnostics Menu
14
The Diagnostics Menu allows the
installer to run a diagnostic check
on the keypad and to verify the
firmware version. The Diagnostics
Menu also contains the update
firmware procedure for updating
the UNO-S2’s firmware.
To access the Diagnostics Menu,
press and hold the Setup button
on the right side of the keypad
until “DIAGNOSTICS” appears on
the display. The menus are out-
lined in the diagram on the next
page.
When finished, press and release
the Setup button again (except for
the Update Firmware where the
power must be cycled).
Note: Do not change Controller ID
settings in this menu. Controller ID
is set in the Controller Setup
Menu of the controller only.