Filter
Top Products
We aim to offer quick, comprehensive and thorough technical support to all
our users so, before you call, please make sure you have all the relevant
information at hand.
To find your local Saitek Technical Support Center, please see the
separate Technical Support Center sheet that came packaged with this
product.
Conditions of Warranty
1. Warranty period is 2 years from date of purchase with proof of
purchase submitted.
2. Operating instructions must be followed.
3. Specifically excludes any damages associated with leakage of
batteries.
Note: Batteries can leak when left unused in a product for a period of
time, so it is advisable to inspect batteries regularly.
4. Product must not have been damaged as a result of defacement,
misuse, abuse, neglect, accident, destruction or alteration of the serial
number, improper electrical voltages or currents, repair, alteration or
maintenance by any person or party other than our own service
facility or an authorized service center, use or installation of non-
Saitek replacement parts in the product or the modification of this
product in any way, or the incorporation of this product into any other
products, or damage to the product caused by accident, fire, floods,
lightning, or acts of God, or any use violative of instructions furnished
by Saitek plc.
5. Obligations of Saitek shall be limited to repair or replacement with the
same or similar unit, at our option. To obtain repairs under this
warranty, present the product and proof of purchase (eg, bill or
invoice) to the authorized Saitek Technical Support Center (listed on
the separate sheet packaged with this product) transportation charges
prepaid. Any requirements that conflict with any state or Federal laws,
rules and/or obligations shall not be enforceable in that particular
territory and Saitek will adhere to those laws, rules, and/or
obligations.
6. When returning the product for repair, please pack it very carefully,
preferably using the original packaging materials. Please also include
an explanatory note.
2 Time expired
When time has expired for either player, the expired symbol and LCD
digits 00.00 on the expired side will flash and the Time Control button of
the expired side will flash RED. If sound is ON, five short beeps will also
be heard.
If the timing mode is Game, the user can still use one of the Time Control
Buttons to start the other clock. When the clock symbol is not flashing it
indicates Delay count down in Tournament mode.
3 Moves not reached within time limit
If the set number of moves is not reached within the time limit, MOVE will
be displayed on both screens and the clock enters PAUSE state, with both
LCD displays flashing. The clock can be restarted by pressing PAUSE or
the Time Control button.
4 Sound effects
To distinguish between the pressing of the Time Control buttons, the
Competition Game Clock unit will emit a low sound when the user presses
the right-hand Time Control Button and a higher sound for the left-hand
Time Control Button.
The OFF/GO slider switch under the bottom cabinet switches the sound
ON and OFF.
5 Restarting the clock after finishing a game
After finishing a game, hold down PAUSE for 3 seconds and the clock will
return to the timer presets selection stage. The timer setting that was just
used will be displayed. The user can press one of the Time Control
buttons to start a game using these same settings, or use Control Pad
UP/DOWN to choose another mode.
TECHNICAL SUPPORT
Can't get your Game Clock to work - don't worry, we're here to help you!
If you experience any difficulty with this product, please first visit our
website www.saitek.com. The technical support area will provide you with
all the information you need to get the most out of your product and should
solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer
your question, please contact your local Saitek Technical Support Team.
Gameclock manual_CZ02_English.qxd 4/11/2006 3:17 PM Page 18