Filter
Top Products
5: Gain control (trimpot) - Use the supplied plastic screwdriver to raise or lower the input level sensitivity of the AL1 as required. See
the “Setting Up and Using Your AirLine System” section on page 17 in this manual for more information.
6: Mute switch - Move this switch in the direction of the arrow to mute the AL1; move it away from the arrow to unmute it and
transmit audio signal
. Because the carrier signal remains during muting, no “pop” or “thud” will be heard. Note that turning this off
does
not turn off the transmitter power—it is simply a way to temporarily mute the transmission of audio signal. If you don’t plan on
using the AL1 for extended periods, turn it off power by using the power on-off switch (see #7 below). Be sure to mute the audio
signal at your external mixer or amplifier before turning the AL1 power on or off, or an audible pop may result.
7: Power switch - Move this switch in the direction of the arrow to turn power to the AL1 on; move it away from the arrow to turn
power off. (to conserve battery power, be sure to turn the AL1 off when not in use).
15
Samson AirLine
Guided Tour - AL1 Presentation Transmitter
GAIN
ENGLISH