Samsung 14-1196 Microcassette Recorder User Manual


 
3
Notes:
•Do
not
touch the microphone grill while
recording. Doing so may cause noise
and degrade the microphone’s
performance.
Be sure to keep the microphone toward
the speaker during recording.
To ensure successful recording, make a
test recording to choose the appropriate
microphone sensitivity before recording.
4'%14&+0)"/'55#)'5"+0"(1.&'4"
=#?"
14"=$?
1. Repeatedly press
MENU/FOLDER
until
Q7Sý
Q7SýQ7Sý
Q7Sý
or
ýQ8S
ýQ8SýQ8S
ýQ8S
appears.
2. Press
REC
to start recording. The record
indicator lights and recording begins.
The display shows the current folder
name, the current message number, the
recording mode (
>G
>G>G
>G
,
IF
IFIF
IF
, or
BF
BFBF
BF
), and the
elapsed recording time.
3. To temporarily stop recording, press
REC
.
F7KI;ý
F7KI;ýF7KI;ý
F7KI;ý
and the record indicator
flash. To resume recording, press
REC
again.
4. Press
STOP
when you are finished
recording.
Notes:
Recording stops if you press
STOP
while
the recorder is paused or leave the
recorder set to pause for 10 minutes.
When the remaining recording time falls
below five minutes, the remaining
recording time appears.
When the remaining recording time falls
below one minute, the record indicator
flashes.
You cannot record additional messages
if
<KBB
<KBB<KBB
<KBB
appears when you press
REC
. To
continue recording, erase unneeded
messages. See “Erasing Messages” on
Page 3.
4'%14&+0)"/'55#)'5"+0"(1.&'4"
=5?
1. Repeatedly press
MENU/FOLDER
until
QIS
QISQIS
QIS
and the current month and day appear.
2. Repeatedly press or hold down –/
)
or
+/
-
to select the desired date.
3. Press
REC
. The record indicator lights
and recording begins.
4. Press
STOP
to stop recording.
%*'%-+0)"6*'"07/$'4"1("(+.'5"
4
'%14&'&"+0"6*'"(1.&'4
Repeatedly press
MENU/FOLDER
until the
desired folder appears.
Hold down
STOP
while the recorder is
stopped. The total number of files recorded in
the folder appears for as long as you hold
down
STOP
.
2.#;+0)"$#%-"/'55#)'5
1. Repeatedly press
MENU/FOLDER
to
select the folder which contains the
message you want to hear.
2. Repeatedly press or hold down –/
)
or
+
/
-
until the number of the message you
want to hear appears.
3. Press
PLAY
to start playback.
4. Adjust the volume to the desired
listening level.
5. To temporarily stop playback, press
PLAY
.
F7KI;
F7KI;F7KI;
F7KI;
flashes. To resume
playback, press
PLAY
again.
6. The recorder automatically stops at the
end of each message. To stop playback
sooner, press
STOP
.
Note:
Playback stops if you press
STOP
while
the recorder is paused or leave the recorder
set to pause for 10 minutes.
75+0)"(#56"2.#;$#%-"
1. To start fast playback (30% faster than
normal speed), hold down
PLAY
for more
than one second while the recorder is
stopped, paused, or in playback.
<#FB7Oý
<#FB7Oý<#FB7Oý
<#FB7Oý
briefly appears.
2. Press
PLAY
again to resume playback at
the normal speed.
3. If you press
STOP
during fast playback or
the recorder reaches the end of a
message, the recorder stops.
75+0)"5%*'&7.'"2.#;$#%-
1. Repeatedly press
MENU/FOLDER
to
select the
QIS
QISQIS
QIS
folder.
2. To select the date for the schedule you
want to check, repeatedly press or hold
down –/
)
or
+/
-
while the recorder is
stopped.
To find the date where the next message
is recorded, hold down –/
)
or
+/
-
while
the recorder is stopped. The recorder
starts searching by date, stops at the
next recorded message, and beeps
twice. If there are no further messages,
the recorder scrolls through the calendar
year by month.
3. Press
PLAY
. The recorder plays back all
messages in succession for the selected
date.
4. Press
STOP
to stop playback.
(#56/(149#4&+0)14'9+0&+0)
To fast-forward through a message, hold
down
+
/
-
for more than one second while
the recorder is paused or in playback.
To rewind through a message, hold down –/
)
for more than one second while the
recorder is paused or in playback.
The recorder continues fast-forwarding or
rewinding as long as you hold down either
button.
When the recorder reaches the end of (while
fast-forwarding) or the beginning of (while
rewinding) a message, the recorder pauses
(for about half a second). Then the recorder
starts fast-forwarding or rewinding the next or
previous message. When the recorder
reaches the first or last message, it
automatically stops.
75+0)"(149#4&"5-+214'8'45'"
5
-+2
To skip backward to a message while the
recorder is stopped, paused, in playback or
fast playback, repeatedly press (or hold down
while the recorder is stopped) –/
)
until the
desired message number appears.
To skip forward to a message while the
recorder is stopped, paused, in playback or
fast playback, repeatedly press (or hold down
while the recorder is stopped)
+/
-
ý
until the
desired message number appears. Release
the button to stop skipping. When the
recorder reaches the first or last message, it
automatically stops.
Note:
You cannot skip forward or backward
in folder [S] while the recorder is stopped.
You can skip forward or backward only while
the recorder is paused or in playback.
'4#5+0)"/'55#)'5
Note:
If you do not press a key for more than
eight seconds, the recorder returns to
standby and does not erase the message.
'4#5+0)"#"5+0).'"/'55#)'
1. Repeatedly press
MENU/FOLDER
to
select the desired folder.
2. Repeatedly press –/
)
or
+
/
-
while the
recorder is stopped, in payback, or
paused to select the message number
you want to erase.
3. Press
ERASE
. The selected message
number,
;H7I;
;H7I;;H7I;
;H7I;
, and
O;I
O;IO;I
O;I
appear
alternately.
4. Press
ERASE
again within eight seconds
to delete the message. Otherwise, press
any other key.