Filter
Top Products
User’s Manual
Introduction
Front
1. Auto button
Use this button to auto adjustment direct access.
2. Exit button
Use this button to Exit the active menu or the OSD.
If the Exit button is pressed while the OSD menu is off, the Analog and
Digital input signal is selected alternately. If the input signal is selected,
the OSD showing the currently selected input signal appears while the
screen flickers. (The OSD showing the currently selected input signal also
appears when the power is turned on or off or the monitor is returned from
the power saving mode.)
3,4. Adjust buttons
These buttons allow you to highlight and adjust items in the menu.
5. Menu button
Use this button to open the OSD and activate a highlighted menu item.
6. Power button
Use this button to turn the monitor on and off.
7. Power indicator
This light glows green during normal operation, and blinks green once as
the monitor saves your adjustments.
Note: See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
(SyncMaster 171T)