Filter
Top Products
Properties window. Monitor' program from ‘Add/Remove Programs’ in the ‘Control
Panel’.
If you remove the program you cannot use all the connected
USB monitors. If you want to use the USB monitor again, you
have to setup the installation program again.
Icons and photos are broken or
jagged in Clone mode (USB
monitor).
This occurs because Windows does not send the screen
updating information to Clone mode if Extended mode is active
on a single PC.
We recommend using the monitor in Extend mode.
How I can clone or extend screen
mode?
Open the “Display Properties” window and select the “Settings”
tab,
Configure the screen mode in the “Settings” tab.
- For more information on how to configure the settings, click
here.
Self-Test
Self-Test Feature Check | Warning Messages | Environment | Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is functioning
properly.
Self-Test Feature Check
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer.
Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller
and computer system; your monitor is functioning properly.
Warnin
g
Messa
g
es
If there is something wrong with the input signal, a message appears on the screen or the screen
goes blank although the power indicator LED is still on. The message may indicate that the monitor is
out of scan range or that you need to check the signal cable.
Environment