Samsung 733A Computer Monitor User Manual


 
Specifications
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual
and adjusts the screen as follows.
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM640 x 350
31.469 70.086 25.175 +/-
IBM640 x 480
31.469 59.940 25.175 -/-
IBM720 x 400
31.469 70.087 28.322 -/+
MAC640 x 480
35.000 66.667 30.240 -/-
MAC832 x 624
49.726 74.551 57.284 -/-
MAC1152 x 870
68.681 75.062 100.000 -/-
VESA640 x 480
37.861 72.809 31.500 -/-
VESA640 x 480
37.500 75.000 31.500 -/-
VESA800 x 600
35.156 56.250 36.000 +/+
VESA800 x 600
37.879 60.317 40.000 +/+
VESA800 x 600
48.077 72.188 50.000 +/+
VESA800 x 600
46.875 75.000 49.500 +/+
VESA1024 x 768
48.363 60.004 65.000 -/-
VESA1024 x 768
56.476 70.069 75.000 -/-
VESA1024 x 768
60.023 75.029 78.750 +/+
VESA1152 x 864
67.500 75.000 108.000 +/+
VESA, 1280 X 960
60.000
60.000 108.000 +/+
VESA, 1280 X 1024 63.981 60.020 108.000 +/+
VESA, 1280 X 1024 79.976 75.025 135.000 +/+
VESA, 1280 X 800 49.702 59.810 83.500 -/+
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the
screen horizontally is called the Horizontal Cycle and the inverse number of
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many times
per second to display an image to the user. The frequency of this repetition is
called the Vertical Frequency or Refresh Rate. Unit: Hz